400mm Milling Thickness Edge Milling Machine With Sandvik Milling
Facer For X , V , J Beveling With Feeding Rack
TX 32A Milling head
TX-40A Milling head
Max. Part length
Plate width(the machining side is parallel )
0o milling angle is not adjustable
Milling head model
Milling head motor power and revote speed
D=125-320mm(out factory with Ø200 facer )
D=160-400mm(out factory with Ø200 facer )
Main axes revote speed
Milling transverse traveling stroke
Milling free speed
Vfast =5m/mi rapid backing motor driving
Hydraulic powered (about 3.5mpa) or gas cylinder powered (6kg/cm2)
- There are manual lubricate pump on the milling moving unit, and it
can drop lube to two sets of rails, in order to make sure that
there are lube film on the rail face.
Milling head forward and
Milling head up and
Hydraulic press jack No.
- It has the automatic hydraulic press jack and manual screw jack at
the down position and press the work piece reliable, which can
avoid the milling shaking and decrease the noise.
- The hydraulic cylinder press work piece, beam has normal spring
deformation and spring upward, after release the hydraulic cylinder
it will reset.